Brake fluid
The fluid level will drop slowly as the brakes wear, and will rise when the brake components are replaced.
Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately.
See also:
Tire change procedure
WARNING: To help prevent the vehicle from moving when you
change a tire, be sure the parking brake is set, then block (in
both directions) the wheel that is diagonally opposite (other side and
e ...
SAFETY
There's no hunting or digging for Latch connectors in the MKZ. They stuck out
from the cushions, so there wasn't any thumb-wrestling with overstuffed cushions
to get everyone's child-safety seats ...
Transmission code designations
You can find a transmission code on
the Safety Compliance Certification
Label. The following table tells you
which transmission each code
represents.
...