Maintenance and Specifications

See also:
Adjusting automatic transmission fluid levels
Before adding any fluid, make sure the correct type is used. The type of
fluid used is normally indicated on the dipstick and also in the
Maintenance product specifications and capacities section ...
Arming the system
The system is ready to arm whenever the ignition is off. To arm the
system, do one of the following:
• Press the control on the remote
entry transmitter.
Note: If you press the control
t ...
Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
1. Remove th ...
