See also:

Setting adaptive cruise control
1. Press and release ON. The message center will display the gray ACC indicator light, current gap setting and SET. 2. Accelerate to the desired speed. 3. Press SET upward and release. ...

Replacing front parking lamp/turn signal bulb
For driver side replacement of the front parking lamp/turn signal bulb, do the following: WARNING: To reduce the risk of vehicle damage and/or personal burn injuries do not start your engine ...

Setting the clock
CLOCK: Press to set the clock. The display will read SET TIME. Use the memory preset numbers (0–9) to enter in the desired time– hours and minutes and press OK. The clock will then begin from that ...